How To Do Dent Removal Orlando FL Service Yourself

June 8, 2014

The joy of owning a new car is unexplainable. Its shiny appearance and smooth body with no scratch is always a great look. However, you should be prepared on what to do when your car starts getting dents. Dent Removal Orlando FL is a company of professionals who make sure that they leave your car as good as it was before the dent. They offer great services and they do not need to paint or conventionally repair the depression for the problem to be fixed. Below are some methods you can use to fix a dent on your car.

The first step involves washing your car when you notice a depression. This should specifically be done using dish washing soaps. The reason being that dish soap is known to effectively remove wax and silicone. If not well washed off, the silicone and wax makes work harder during dent repair as tools used tend to slip. You are therefore advised not to use those soaps which you use to wash your car as they are made not to remove silicone and wax.

The second thing that you need to do when you notice dents is to remove wax and greases. In case grease is noticed, it can be removed using the normal removers. Today, you will get several removers in the market. An alternative is to use warm water and juices made from lemon. It is a good ingredient known to clean the body from grease effects.

Before you start solving the problem, you have to find the best tools for the job. The repair works require that you buy the right tools and machines. In case the problem has occurred in a place where you can access both sides, it becomes easier because you only need hammers and dollies. If the access is only available on one side, the best thing is to use stud welder guns. Many hardware shops sell this tool.

Normally, there is a golden principal that is applied when eliminating a bump. The rule states that you should start repairing the last problem and end with the first one. It is a backtracking principle where you are required to repair the recent damage and work backward to the earlier damage. The process is kind of reverse of the whole repairing process.

Since most dents affect the body, the most effective method used is the heat shrinking. In this case, you are required to shrink the metal body after the use of heat which expands it. You are however advised not to apply so much heat as it ends up damaging the body and paint. Cooling by using ice cubes or any available coolant helps to stop the damage.

Use of fillers is also another effective method of rectifying dents. The fillers are applied directly on the metallic body but only after any old applications have been removed, and the metal has been properly straightened. Using a sand paper is an effective method of ensuring that all the old coatings have been removed.

Knowing how to correct dents on your car is of great advantage. You will save a lot as compared to if you would have taken the car to the mechanics. Apart from that, you will be able to do the work with no pressure and at your own desired time.

Read more about How To Do Dent Removal Orlando FL Service Yourself.

tags: , , , , ,
posted in Autos by Sally Delacruz

Powered by Wordpress and MySQL. Theme by Shlomi Noach,